Electronic structures of carbazole and its derivatives: A semi-empirical study on the substitution effects of carbazole

The electronic structures of carbazole, N-phenylcarbazole (NPC), cyanophenylcarbazole (CPC) and N-ethylcarbazole (NEC) have been calculated using the quantum chemical semi-empirical MINDO/3 method. In this paper, electronic ground states and first singlet excited states of the systems mentioned were investigated. It is observed that the excitation energy of carbazole based on the calculated difference in heats of formation agrees quite well with experimental data obtained from supersonic expansion studies. Calculated energy levels of molecular orbitals and their graphical forms are used qualitatively in elucidating the S₀ → S₁ excitation electronic origin red shifts observed in carbazole derivatives with respect to the electronic origin of the parent carbazole. It is noted that the red shifts are not just a result of the destabilization of the HOMO of carbazole but are also determined by the nature of the substituting moieties. It is also observed that the LUMO of CPC is not derived from the parent carbazole which partially explains the difference in electronic behaviour as compared with the other derivatives.     

Preparation and characterization of La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>Co<Subscript>0.2</Subscript>Fe<Subscript>0.8</Subscript>O<Subscript>3-δ</Subscript> thin-film membrane on porous support by dip-coating method

Perovskite-type La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ (LSCF6428) thin-film membrane prepared by modified Pechini sol–gel process, was successfully deposited on porous support of similar composition using dip-coating method. Fine grain and crack-free film with perovskite structure was obtained at sintering temperature of 800 °C and dwelling time of 60 min. The cross-sectional image indicated that LSCF6428 thin-film membrane coated on the porous support showed excellent adhesion to the support with uniform thickness. The minimum dense layer thickness obtained by dip-coating method was around 0.5 μm. It was found that the oxygen permeability of the supported thin film was lower than that of the perovskite support, which indicated that the pores of the support were reduced by thin-film deposition on the support surface. The reduction in the pore size led to the more selective permeation mechanism contributes to the overall permeation. Successful deposition of LSCF6428 thin-film membrane on porous support can be considered as a promising technique for the preparation of oxygen separation membrane.     

Two new acridone alkaloids from Glycosmis macrantha

Extraction and chromatographic separation of the extracts of dried stem barks of Glycosmis macrantha lead to isolation of two new acridone alkaloids, macranthanine and 7-hydroxynoracronycine, and a known acridone, atalaphyllidine. The structures of these alkaloids were determined by detailed spectral analysis and also by comparison with reported data.     

Phytochemical and cytotoxic investigations of Curcuma mangga rhizomes

Investigations on the cytotoxic effects of the crude methanol and fractionated extracts (hexane, ethyl acetate) C. mangga against six human cancer cell lines, namely the hormone-dependent breast cell line (MCF-7), nasopharyngeal epidermoid cell line (KB), lung cell line (A549), cervical cell line (Ca Ski), colon cell lines (HCT 116 and HT-29), and one non-cancer human fibroblast cell line (MRC-5) were conducted using an in-vitro neutral red cytotoxicity assay. The crude methanol and fractionated extracts (hexane and ethyl acetate) displayed good cytotoxic effects against MCF-7, KB, A549, Ca Ski and HT-29 cell lines, but exerted no damage on the MRC-5 line. Chemical investigation from the hexane and ethyl acetate fractions resulted in the isolation of seven pure compounds, namely (E)-labda-8(17),12-dien-15,16-dial (1), (E)-15,16-bisnor-labda-8(17),11-dien-13-on (2), zerumin A (3), β-sitosterol, curcumin, demethoxycurcumin and bis-demethoxycurcumin. Compounds 1 and 3 exhibited high cytotoxic effects against all six selected cancer cell lines, while compounds 2 showed no anti-proliferative activity on the tested cell lines. Compound 1 also demonstrated strong cytotoxicity against the normal cell line MRC-5. This paper reports for the first time the cytotoxic activities of C. mangga extracts on KB, A549, Ca Ski, HT-29 and MRC-5, and the occurrence of compound 2 and 3 in C. mangga.     

Liquid Film on Unsteady Stretching Sheet with General Surface Temperature and Viscous Dissipation

We study the effects of viscous dissipation on flow and heat transfer in a thin liquid film on an unsteady stretching sheet. A general surface temperature is taken into consideration. The velocity and temperature fields are solved using the homotopy analysis method. The results show that the increasing values of the Eckert number can increase temperature distribution and the heat transfer rate.     

On convergence of homotopy analysis method and its modification for fractional modified KdV equations

In this paper, the homotopy analysis method (HAM) and its modification (MHAM) are applied to solve the nonlinear time- and space-fractional modified Korteweg-de Vries (fmKdV). The fractional derivatives are described by Caputo’s sense. Approximate and exact analytical solutions of the fmKdV are obtained. The MHAM in particular overcomes the computing difficulty encountered in HAM. Convergence theorems for both the homogeneous and non-homogeneous cases are given. The results of applying this procedure to the studied cases show the high accuracy and efficiency of the approach.     

Physical, structural, and luminescence studies of Nd3+ doped MgO-ZnO borate glass

A series of borate glass of the system xNd₂O₃-5MgO-20ZnO-(75 ? x)B₂O₃, where x = 0.5, 1.0,1.5, 2.0, and 2.5 was successfully fabricated using melt quench method. The properties of the glass were characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR), absorption and luminescence spectra. The upconversion properties of Nd³⁺ doped borate glass were observed by using 574 nm excitation wavelength corresponding to ⁴ I _15/2 → ² H _114/2 transition. The emission bands centered at 460, 500 and 620 nm which corresponding to the Nd³⁺ transitions, ⁴ F _7/2 → ⁴ I _15/2, ² H _11/2 → ⁴ I _15/2, and ⁴ F _9/2 → ⁴ I _15/2 respectively were observed at room temperature. The presence of Nd³⁺ in borate based glass could intensify the upconversion luminescence spectra as it can potentially be used as host materials for upconversion lasers.     

Assessment of health risk associated with natural gamma dose rate levels and isodose mapping of Jordan

ABSTRACT

As a pioneering study in Jordan, an extensive measurement for external gamma dose rate (GDR) was conducted. A portable gamma radiation detector was used to perform these measurements at 1?m above the soil surface. A geographical positioning system Garmin was used to record a total of 823 measured points. The GDRs’ measurement ranged from 35 to 470?nGy?h^?1 giving a mean value of 90?nGy?h^?1, which was found to be one and half times higher than the world average of 59?nGy?h^?1. The lowest mean GDR 72?nGy?h^?1 was found in the Albalqa governate, while the highest mean GDR 131?nGy?h^?1 was found to be for the Alkarak governate. The mean annual effective dose was found to be 0.551?mSv, which is higher than the world average value of 0.48?mSv. This is a pivotal study evaluating the risks associated with GDR levels in Jordan that were the relative excess lifetime cancer risk, the mean collective effective dose, the mean weighted GDR and the mean lifetime dose that are 2.24?×?10^?3, 5538manSv?y^?1, 0.531?mSv and 39?mSv, respectively. The cosmic rays mean GDR was determined to be 20?nGy?h^?1. This study focuses on constructing GDRs’ baseline data in Jordan, which will be used to determine the possible change in the natural radiation due to other human activities in the future. ArcGIS software was employed to generate an isodose map to characterise exposure rates caused by GDR in Jordan.     

Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase

This study examined the foot biomechanics that are utilized when foot is in contact with the ground during a stance phase. The purpose of the study was to investigate the normalized ground reaction forces that impacted certain sections and points on the footprint, and to identify patterns in the degrees to which these forces occurred. Foot was modeled in such a manner that a vertex represented a bone and an edge represented a joint, and a graph that depicted the foot was created. Twelve nodes were marked on the footprint and these were linked together to create a gait path. By fusing the graph and the gait path and by manipulating the mathematical models, a profile for an ideal bipedal walking locomotion was developed. A male subject performed bipedal walking through a force plate system in order to obtain the profile that reflected actual bipedal walking. The actual and the proposed profiles were compared and there were significant similarities between the two profiles, with both exhibiting an double-bump pattern. It is therefore viable that the approximation techniques proposed in this work may provide an alternative means over the application of a force plate system to generate a profile for bipedal walking. However, the accuracy and reliability of the results yielded from this technique need further investigation.